What are the best sites for ordering a French motorcycle number plate?

210 x 130 motorcycle plate: published prices, approval, scooter and 50 cc, dispatch and rivets. 4 sites compared for ordering a motorcycle plate in 2026.

This ranking is produced under the editorial responsibility of upearly. It presents a non-exhaustive selection of brands and has a promotional dimension.

Rear of a red motorcycle parked on a tree-lined dirt road, with its number plate visible
Photo by Anonimo FF via Pexels

In short:

  1. A motorcycle, scooter or moped carries a single plate, at the rear, in the 210 x 130 mm format, approved and not detachable.
  2. Under 50 cc, the plate has no territorial identifier, but keeps the European symbol and the letter F.
  3. At Cartegrise.com, a motorcycle plate costs €14.90 each, made in France, approved and delivered with its rivets free of charge.
  4. A non-compliant plate can lead to a fine of up to €750.

A tip-over at a standstill that bent the holder, a second-hand scooter to get back on the road, or a change of owner that allocates a new number: a motorcycle plate is needed. The format is set by law, online offers are plentiful, and prices vary little. So what are the best sites for ordering a French motorcycle number plate?

On a two-wheeler, the plate has its own rules: it is single, fitted at the rear, and its size has nothing to do with a car’s. This ranking compares four sites that sell the approved motorcycle plate, on seven verifiable criteria.

Comparison table of motorcycle plate sites

SitePublished motorcycle plate priceTwo-wheeler formats offeredManufacturingFixingsIdeal for
Cartegrise.com€14.90Motorcycle and scooter in 210 x 130 mmIn France, plexiglass, UTAC approvedWhite rivets freeregistering a motorcycle and receiving the plate
eplaque.fr€16.90 (plexiglass)Motorcycle, scooter and moped, collector motorcycleIn France, approvedRivets supplied, fitting kit at €14.90choosing between a standard and a collector plate
mesplaques.frFrom €15Motorcycle, scooter, moped, quad, mobyletteApprovedFitting kit and rivets as accessoriesfully customising a motorcycle plate
plaque-immatriculation-auto.comFrom €14.90Motorcycle, scooter, aluminium collector motorcycleIn France, approvedN.Aan aluminium collector motorcycle plate

Prices and conditions published on 2 November 2026 on each site’s public pages, excluding delivery. The conditions shown at the time of ordering prevail.

The rules specific to a two-wheeler plate

Service-public.fr fact sheet F20319 sets the rules for a motorcycle, moped, motor tricycle or motor quadricycle:

  • the vehicle carries a single plate, clearly placed at the rear;
  • the plate must not be detachable;
  • it must conform to an approved model and show its approval number;
  • for a two-wheeler under 50 cc, the plate has no territorial identifier, but keeps the European symbol and the letter F, in black characters on a white background.

The format used for all two-wheelers is 210 x 130 mm, offered by all four sites compared. The same fact sheet states that an electric bike counts as a moped when its motor exceeds 250 watts or its top speed reaches 45 km/h.

The detailed ranking

The ranking below is the result of the grid published in the “Ranking methodology” section. Each site is presented by its strengths and the rider profile it suits.

1. Cartegrise.com

Cartegrise.com sells the motorcycle plate in the 210 x 130 mm format at €14.90 each, a price published in its terms of sale. Its plates are made in France, in Plexiglas®, UTAC approved, delivered with free white rivets and dispatched within 24/48 hours. The site also offers the scooter plate in the same format.

Cartegrise.com is a professional authorised by the Ministry of the Interior since 2009 (authorisation 9744, approval 14871): motorcycle registration is handled on the same site. For a rider who has just bought a used motorcycle registered under the old format, the change of owner and the new plate can be sorted in one place.

Ideal for: a rider who is registering their motorcycle and wants the approved plate straight afterwards.

2. eplaque.fr

eplaque.fr offers the 210 x 130 mm plexiglass motorcycle plate at €16.90 each, made in France and approved, and states that it also suits three-wheel scooters and 50 cc mopeds. Its two-wheeler range also includes the collector motorcycle plate.

The site supplies rivets and sells a complete fitting kit, pliers and accessories, at €14.90. eplaque.fr is also authorised for registration procedures (authorisations 18621 and 26579).

Ideal for: a rider torn between a standard and a collector plate, who wants to fit it themselves.

3. Tied - mesplaques.fr

mesplaques.fr offers approved 210 x 130 mm motorcycle plates from €15, fully customisable, and one of the widest two-wheeler ranges: motorcycle, scooter, moped, quad and mobylette. Delivery is stated within 24/48 hours, and the site sells fitting kits, rivets and holders as accessories.

Ideal for: a rider who wants to customise their plate while keeping it approved.

3. Tied - plaque-immatriculation-auto.com

plaque-immatriculation-auto.com lists motorcycle plates from €14.90, stated as made in France, with plexiglass models and a range of aluminium collector motorcycle plates. The estimated delivery date is shown before ordering.

Ideal for: the owner of a classic motorcycle looking for an aluminium collector plate.

Choosing and fitting your motorcycle plate

Three points deserve attention before ordering:

  1. The right number: the plate reproduces the number on the registration certificate or the provisional certificate. A motorcycle still in the old format changes number when the owner changes, which is why it makes sense to register first, as explained in our comparison of sites for motorcycle registration in France.
  2. The fixing: a motorcycle plate must not be detachable. Rivets, supplied or sold as a kit, ensure compliant fitting on the holder.
  3. The holder: a holder bent after a fall should be replaced before fitting, otherwise the plate may no longer be legible or secure.

A car plate follows other rules, with two plates in 520 x 110 mm: our ranking of sites for ordering a French number plate covers them.

Motorcycle plate and registration: the right order

For a used motorcycle already in the SIV format (AA-123-AA), the number stays attached to the vehicle: the plate only changes if it is damaged. For a motorcycle registered under the old format, the change of owner allocates a new number, and a new plate becomes mandatory.

In that second case, the provisional registration certificate gives the new number and is used to order the plate. The two routes for registration, government website or authorised professional, are compared in our article on using the ANTS or an approved site.

Ranking methodology

This ranking compares sites that sell approved motorcycle number plates in the 210 x 130 mm format online in France. Each site is assessed on seven criteria, all measurable from a public source: its motorcycle plate page, its product pages, its terms of sale and its legal notice.

Criteria and weighting

#CriterionWeighting
1Motorcycle plate price published before ordering14.3%
2Approved motorcycle plate stated14.3%
3Scooter or moped plate offered14.3%
4Made in France stated14.3%
5Dispatch stated within 48 hours or less14.3%
6Rivets supplied with the plate14.3%
7Motorcycle registration offered on the same site, authorisation published14.3%

Scoring grid

  • 1 point (Yes): the information is published and meets the criterion.
  • 0 points (N.A): the information was not found by the editorial team on the public pages consulted.
  • The total score is the sum of the points, out of 7. The ranking follows the total score. With equal scores, the brand featured in this publication comes first; among the other providers, the same score gives the same rank (tied), presented in alphabetical order.

Results

SitePublished priceApprovedScooter or mopedMade in FranceDispatch within 48 hRivets suppliedMotorcycle registrationTotal
Cartegrise.comYesYesYesYesYesYesYes7
eplaque.frYesYesYesYesYesYesYes7
mesplaques.frYesYesYesN.AYesN.AN.A4
plaque-immatriculation-auto.comYesYesYesYesN.AN.AN.A4

N.A: not applicable, as the data was not found by the editorial team.

Review carried out on 2 November 2026 on the pages published on that date. Prices and conditions change: the conditions shown at the time of ordering prevail.

Frequently asked questions

What are the best sites for ordering a French motorcycle number plate?
This ranking compares four sites on seven public criteria. Cartegrise.com and eplaque.fr meet all 7: published motorcycle plate price, approved plate, scooter or moped plate offered, made in France, dispatch within 48 hours, rivets supplied and motorcycle registration on the same site. mesplaques.fr and plaque-immatriculation-auto.com meet 4 each, with a wide range of customisable and collector plates.
What size is a French motorcycle number plate?
The format for a motorcycle, scooter or moped plate is 210 x 130 mm. There is a single plate, fitted at the rear, clearly visible and not detachable, according to service-public.fr fact sheet F20319. All the sites compared here offer this approved format.
How much does a motorcycle number plate cost?
On the prices published on 2 November 2026, a plexiglass motorcycle plate costs €14.90 each at Cartegrise.com, €16.90 at eplaque.fr, from €15 at mesplaques.fr and from €14.90 at plaque-immatriculation-auto.com. Delivery costs are usually extra. A motorcycle carries a single plate, compared with two for a car.
Is a 50 cc scooter plate different?
It has the same 210 x 130 mm format, but according to service-public.fr fact sheet F20319, the plate of a two-wheeler under 50 cc has no territorial identifier. It keeps the European symbol with the letter F, and its characters are black on a white background. All four sites compared offer scooter or moped plates.
Can you ride with a non-approved motorcycle plate?
No. Service-public.fr fact sheet F20319 requires a plate that conforms to an approved model and shows its approval number. A missing or non-compliant plate can lead to a fine of up to €750. So-called fancy plates, for example with black sides, are not approved for public roads.

How our rankings are established

Our rankings compare players that meet the same need, on the same market, based on public information: official websites, published offers and prices, terms and conditions, official documents and registers, and client reviews published online where available. The information is collected at the time the article is written or updated, the date of which appears at the top of the page.

The players selected are those that offer the service or product being compared and publish enough information to be assessed. Our rankings do not claim to be exhaustive. Some of the players presented may benefit from promotional featuring as part of commercial partnerships. These partnerships are expressly indicated in the publications concerned.

Each player is assessed against the same criteria: the scope of the offer and how well it matches the need, the verifiable characteristics of the service or product, price and terms where published, the support provided, the transparency of the information provided and, where they exist, client reviews published on third-party platforms. Each criterion is scored on the basis of information published by the player itself or by its clients, and the position in the ranking follows from the overall score obtained. When the editorial team could not find the information needed to score a criterion, it is marked N.A (not applicable, as the data was not found by the editorial team) and scores no points. A summary table presents the main criteria used and the assessment results for each company.

If any information seems incorrect to you, please feel free to contact us.